|
AudioSource EQ200 10-Band Stereo Graphic Equalizer | 
| Brand: AudioSource
List Price: $159.99
Buy New: $99.88
You Save: $60.11 (38%)
New (35) Used (1) from $88.87
Media: Electronics
Autographed: No
Memorabilia: No
Shipping Weight (lbs): 5.5
Dimensions (in): 17.1 x 16.5 x 2.8
Legal Disclaimer: Warranty does not cover misuse of product.
MPN: EQ200
Model: EQ200
UPC: 041087160003
EAN: 0041087160003
| |
| Features:
| • | 10-band stereo graphic equalizer with 10 slider controls for each channel | | • | Sliders range from 39 Hz to 16 kHz; overall frequency response of 10 Hz to 50 kHz | | • | Illuminated LED sliders with multicolor spectrum analyzer that monitors audio output | | • | EQ bypass function contrasts between "equalized" and "unequalized" sounds | | • | Includes 2 A/V inputs and 2 tape inputs and outputs; 16.56 by 3.5 by 11.88 inches (W x H x D) |
|
| Editorial Reviews:
Product Description
The 10 band stereo graphic equalizer EQ200 continues a 20-year tradition of building unique equalizers.PRODUCT FEATURESDual tape monitor loop;Multi colored spectrum analyzer display;LEDs in all sliders.
Amazon.com Product Description
Enjoy precise audio control over your home stereo system with the AudioSource EQ200 10-band graphic equalizer. The device boasts 20 bands of frequency adjustments (10 for each channel) to improve the performance of everything from classic LPs to modern CDs and MP3s. Each EQ slider is positioned one octave apart from the others--from 39 Hz to 16 kHz--to correspond with the entire range of human hearing. To adjust the vocal or instrumental balance of a favorite song, merely move the matching sliders up or down (each features 12 dB of boost or cut) until the right level is reached. Identification is simple thanks to the illuminated LEDs (one for each slider). Plus, the device offers a multicolor spectrum analyzer, which interprets the signal levels of the sliders and displays them onscreen. The analyzer not only helps you monitor the audio output, but it also looks ultra-cool when the lights are low. The EQ200 features two A/V inputs that offer the ability to control traditional audio sources, such as a CD player or turntable, along with the audio channels of video sources like VCRs or DVD players. To select an audio source, the listener merely presses the A/V button to the "in" position, while leaving it "out" controls the video source. Note that the EQ200 only affects the audio of DVD players or satellite systems. It has no impact on the picture, nor does it include any video-type connections. Users can also connect two cassette decks to the unit through the dedicated Tape 1 and Tape 2 inputs and outputs. The EQ200 plugs into your stereo through your receiver's Tape Monitor Loop input. As such, it offers a number of functions specifically designed for connected cassette decks, including a Tape 1-2/Tape 2-1 button that assists you when making tape copies with one deck or dubbing between a pair of tape decks. Listeners don't have to forfeit the traditional recording functions of their cassette decks, either, as the EQ200's tape outputs facilitate recording from the radio, CD, or other sources. Other functions include EQ record, which lets you make a tape copy using a customized equalization curve, and the non-cassette-specific EQ bypass, which allows the user to make comparisons between "equalized" and unequalized" sounds. So of the missing piece to your audio puzzle is the ability to fine-tune your music to meet your demanding tastes, the EQ200 may be a good fit for your system. The device measures 16.56 by 3.5 by 11.88 inches (W x H x D) and is covered by a two-year warranty. What's in the Box
EQ200 graphic equalizer, two 34-inch stereo RCA cables, warranty/registration sheet, user's manual.
|
| Customer Reviews: Read 12 more reviews...
 Please Read This Review it Will Same you Time. November 17, 2008
This product does not work. I purchased this product to replace a Faulting ADC 215 Equalizer. This was the only choice on the market. After getting the unit I was able to connect it quite simple in to my system. I have a DBX unit for my Reel To Reel and had to connect it directly to the Reel To Reel, not much of a problem. But then the problem started to unfold. First the buttons, They are confusing, and don't work half the time. Then I noticed that I could not monitor tape recording output from Three head Deck and DBX record monitoring. With the EQ connected to a deck that monitors it seem to short the input to the output, causing the input level control not to respond, not distortion but not good for you tape deck. After that I started tested a different configurations. I have a 2 Head deck, So I connected it to the EQ 200 and it worked okay, but still had problems with the buttons happened again. I then connected the Reel to Reel without DBX, direct bypass the monitor loop and it worked okay for the first few times, then all of a sudden I could not record on the Reel To Reel, the input controls didnot work and the signal to the meters were pegged, not good, then I losted the 2 head deck. Powered off everything and tried again. After several reset everything worked again. So I decided to give this unit one more try, by adding one piece at a time and testing one piece one piece at a time. I added the Three Head Deck (Teac V711), to Tape1, then tested, worked okay for a while and then things started not working. Remember this is just 1 TAPE DECK !!!!!! connected. Powered off all components and things went back to working. I said okay maybe it is me let me read the manual more closely. Figured out the button (Tape 1>2/Tape2<1) button depends on the setting of the (Audio/Video) button and also the (Line/Tape) button so to listen to Tape Deck 1 you must have Tape1>2 + Audio/Video + Line/Tape LED Green. Okay that worked, only for about and hour and then same problem happen, input controls stop working and meter pegged and again this is just 1 TAPE DECK CONNECTED !!!!!.
What I have found out after opening the unit and putting it on a Oscilloscope, I found that the contacts in the switches are very poorly made and are solider to close together and are causing electrical interference. When a button is depressed and testing the contacts on the Oscilloscope showed a little ambient noise -75dbm level, which is okay, but as you use the switch the noise level increases until it shorts, that is why when you power off and let the unit sit and power back on it works okay that is kind of a electrical discharge so to speak and the ambient noise is back to around -70 ~ -75dbm. The open circuit test fluctuated from inf to 10K ohm resistance. Closed circuit test revealed from 0 ~ 1 ohm resistance on average but fluctuated to inf at times. That why the sound cuts out and the input shorts to the output.
So all in all the unit went back for a refund. Please don't buy this unit. It is low quality and poor craftsmanship that it will not last more than a month or so. It does not support tape monitoring, and don't try to connect a Three Head Deck it will short out your Deck. The buttons don't work and short constantly. Tape to Tape dubbing is limited to only monitoring source, THAT IS CORRECT, when dubbing you can only list to the source Tape and not the dubbing tape to insure that the deck is recording okay. This is a very poor design!!!
 AudioSource Grafic Equalizer August 11, 2008
This is a great item to add to your stereo system. Really worth the money. Works best with the Audiosource preone/A pre-amplifier.
Works well June 1, 2008
The equalizer works well, but a digital system that can "remember" various music types (classical, Jazz, Rock, etc) would have been more usefull. I had to make a drawing of each application (for example old turntable, jazz, classical) settings and change the sliders every time I change my CD or phono music. Next step is to upgrade to a better system I guess ...
STAY ALWAY FROM THIS JUNK May 19, 2008
1 out of 1 found this review helpful
I READ THE REVIEWS OF THE PRODUCT AND DIDN'T LISTEN TO THEM. THREE MONTHS AFTER I HAD IT THE EQ BUTTON STARTED ACTING UP AND CHANNELS WERE CUTTING OUT AND THE PROBLEM GOT PROGRESSIVELY WORSE. TO THE POINT THAT IT WAS TOTALLY ANNOYING. THEN THE SOUND QUALITY WENT BAD ON IT. I STARTED GETTING DISTORTION AND I WOULD SOMETIMES GET THESE SONIC SCREECHES EVEN WITH THE TREBLE TURNED DOWN ON THE AMP. THE UNIT HAS A LEFT AND A RIGHT CHANNEL VOLUME CONTROL, IT WAS A NICE FEATURE IF YOU WANTED TO TWEAK THE BALANCE IN YOUR ROOM. THEN THE RIGHT CHANNEL WENT SOUR AND DROPPED HALF ITS VOLUME. THAT'S WHEN THE AUDIOSOURCE EQ200 TOOK A LITTLE TRIP TO THE GARBAGE DUMPSTER. EVEN THOUGH THE COMPANY IS BASED IN AMERICA IT'S ACTUALLY CHEAP CHINESE JUNK. MANUFACTURED IN CHINA WITH CHEAP,INFERIOR PARTS. NO QUALITY WENT INTO THIS MACHINE, DON'T WASTE YOUR MONEY. I CLEANED UP MY OLD TEAC EQUALIZER THAT I'VE HAD SINCE THE LATE 70'S AND MY SOUND SYSTEM IS BACK IN BUSINESS.
Not Very Good Quality Equipment April 10, 2008
It worked well for the first few months but then the left channel started getting static in it and soon went dead. It shouldn't have gone bad so quickly. I'm using a Pioneer receiver that is pushing 10 years in age and it still works beautifully. I don't know if I just got a lemon or not but I won't be buying another.
|
|
|
[ powered by full speed ]
| |
